Installation Guide

Step 6
1 ) Attach the antenna cable to left
side of the Neurio Sensor.
2) Locate a free ½" or ¾" metal
circular knockout in your panel
and remove the metal tab to
expose the hole.
3 ) Remove the nut at
the end of the cable
and insert the cable
through either the ½"
or ¾" antenna mount.
based on the size of
knockout hole.
4 ) Replace the nut
on the cable and
attach the antenna
to the end of the
antenna cable.
5 ) With the antenna
inserted into the
antenna mount,
insert the antenna
through the open
knockout and click
the antenna mount
in place.
NOTE: If you are having
troubles removing the
knockout, use a hammer to
gently tap the screwdriver
to pry the knockout open.