Installation Guide

Step 3
OFF
OFF
Find a suitable place in your panel where Neurio can fit.
Then, using the supplied self-drilling screws, secure
Neurio to your metal panel.
CAUTION: Be sure to account for the length of the 4 foot CTs and the 2
foot voltage cable, and ensure that there is enough room on the sides of
Neurio for the wires and antenna to connect to.
OFF
OFF
OFF
OFF
TOO FAR FOR
THE WIRES
TOO CLOSE TO THE
SIDES OF PANEL
MAX. 4'
NOTE: The self-drilling
screws will need pressure
to drill through the metal.