Integration Guide

2. Antenna
Please perform antenna design that follows the specifications of the antenna
The concrete contents of a check are the following three points.
１）It is the same type as the antenna type of antenna specifications.
• Confirm the same size as the Gerber file.
２）An antenna gain is lower than a gain given in antenna specifications.
• Measure the gain, and confirm the peak gain is less than the application value (1.4dBi)
３）The emission level is not getting worse.
• Measure the spurious, and confirm degradation of less than 3dB than spurious value of worst of report
used for the application. However it is spurious defined below.