User Manual

KH 80 DSP | 10
Functionality of the Neumann logo
Action Logo indication
Firmware activities
Loudspeaker is booting up Solid red
Loudspeaker boot up error Fast red flashing
Loudspeaker firmware is being updated Solid rosé
Loudspeaker resetting to factory default settings Rosé flutter flash
Everyday operation
Operating normally (dimmable via Neumann.
Control)
Solid white
Loudspeaker in active system is solo’ed in
Neumann.Control
Solid white
Loudspeaker system output level is dimmed or
muted (GUI button on Operate page)
Solid rosé
Neumann.Control is saving changes to the
loudspeaker’s memory (not Operate page
commands)
Solid rosé
Protection and Standby
Protection system is activated (takes priority over
other indications)
Red
Neumann.Control Alignment
Setup: Identify the loudspeaker Rosé pulses (2 Hz) + audible ID
tone
Guided Alignment: Loudspeaker is selected Rosé pulses (0.5 Hz)
Manual Alignment: Loudspeaker is selected Solid rosé
Precision Alignment: During countdown 10 rosé pulses (1 Hz)
Precision Alignment: Measuring the loudspeaker Red to White crossfade + test
signal
Precision Alignment: Loudspeaker not being
measured
White
EN