User Manual

8 | KH 310
X
Copy the diagram “Installation angles” that can be found at the end of this operating manual.
X
Place the diagram at the listening position or center of the listening area.
X
Using a tape measure or a cable, place the loudspeakers at the same distance from the center of
the diagram “Installation angles”. To ensure good imaging, do this at an accuracy of at least
1cm (
1
/
2
").
X
Make sure that the distances are equal:
Length I
Front Left
Surround
Left
Surround
Right
Front Center Front Right
Length I
Length I
Length I
Length I
Listening
position
If the loudspeakers cannot be placed at the same distance from the listening position:
X
Compensate for distance di erences > 1 cm (
1
/
2
") by delaying closer loudspeakers by 30 s/
cm (76 s/inch).
X
At the same time, check the location of the loudspeaker cabinet. This depends on the appli-
cation:
• 2.0 systems (stereo): ±30°, plus optional subwoofer(s)
• 5.1 systems:
ITU-R BS.775-1: 0°, ±30°, ±110° (±10°), plus optional subwoofer(s)
(center, front left/right, surround left/right)
ANSI/SMPTE 202M: 0°, ±22.5°, arrays to the surround left and to the surround right,
plus optional subwoofer(s)
• 7.1 systems: 0°, ±30°, ±90°, ±150°, plus optional subwoofer(s)
(center, front left/right, side left/right, back left/right)
Arranging the
loudspeakers
EN