EN User Manual Hob PH601SS
Contents Safety information Safety instructions Product description Daily use Hints and tips Care and cleaning 2 3 5 5 6 6 Troubleshooting Installation Technical data Energy efficiency GREAT BRITAIN – Customer Care and Service 6 7 8 8 9 Subject to change without notice. Safety information Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage.
• • • • • • • • WARNING: Unattended cooking on a hob with fat or oil can be dangerous and may result in fire. NEVER try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket. CAUTION: The cooking process has to be supervised. A short term cooking process has to be supervised continuously. WARNING: Danger of fire: Do not store items on the cooking surfaces.
• • • • • • • • • Make sure the mains cable or plug (if applicable) does not touch the hot appliance or hot cookware, when you connect the appliance to the near sockets Do not use multi-plug adapters and extension cables. Make sure not to cause damage to the mains plug (if applicable) or to the mains cable. Contact our Authorised Service Centre or an electrician to change a damaged mains cable.
Service • • Use original spare parts only. To repair the appliance contact an Authorised Service Centre. Product description Cooking surface layout 1 Cooking zone 2 Control knobs 3 Power indicator 1 1 145 mm 180 mm 2 180 mm 145 mm 3 1 1 Residual heat Control knob Symbol Function 0 Off position 1-6 Heat settings Warning! There is a risk of burns from residual heat. Daily use Warning! Refer to Safety chapters.
Power indicator activates when one or more cooking zones are activated. When you deactivate the cooking zones the indicator deactivates. Hints and tips Warning! Refer to Safety chapters. Heat setting: Cookware The bottom of the cookware must be as thick and flat as possible. Caution! Do not use cast iron pans, potstones, earthenware, grill or toaster plates. The stainless steel can become tarnished if it is too much heated.
What to do if... Problem Possible cause You cannot activate or operate the hob. The hob is not connected to an electrical supply or it is connected incorrectly. Check if the hob is correctly connected to the electrical supply. Refer to the connection diagram. The fuse is blown. Make sure that the fuse is the cause of the malfunction. If the fuse is blown again and again, contact a qualified electrician. If you cannot find a solution... also during the warranty period.
PNC ......................................... Serial number ........................... Built-in hobs A Only use the built-in hobs after you assemble the hob into correct built-in units and work surfaces that align to the standards. Connection cable • B For a single phase or two phase connection use the following (or higher) mains cable type: H05V2V2-F T min 90°C. Building In A. supplied seal B. supplied brackets Caution! Install the appliance only on a worktop with flat surface. min. 650 mm min.
Diameter of circular cooking zones (Ø) Left front Left rear Right front Right rear 18.0 cm 14.5 cm 14.5 cm 18.0 cm Energy consumption per cooking zone (EC electric cooking) Left front Left rear Right front Right rear 199.9 Wh / kg 199.9 Wh / kg 199.9 Wh / kg 199.9 Wh / kg Energy consumption of the hob (EC electric hob) 199.
867332848-A-402016