Operation Manual

NX-595E User Manual 19
Menu 2 - System Control
2.1 Security System Status


2.2 Partition Control
 2.2.1 To turn off
 2.2.2 Away arm
 2.2.3 Stay arm
 2.3 To Control Zone Bypass
 2.4 Event History
Partition Control – Single Partition
Disarming: To turn your security system Off, from either the Away or Stay arming
modes.
Away Arming: To turn your security system On when you are leaving the
premises
Stay Arming: To turn your security system on when you are staying in the
premises, this will automatically bypass pre-programmed zones and arm others.
Mainly utilized for arming just the perimeter of the premises.
Disarm – Single partition system
How to: Disarm a single partition system
Step Example: Disarming
1.
[PIN] Call the NX-595E via an offsite touch-tone phone to begin the session.
2.
Press [2] for system control menu.
Press [2] for partition control menu.
Press [1] to turn off.
3.
1
st
star, moves back to system control menu.
2nd star, moves back to main menu.
# Disconnects session.
Away Arm – Single partition system
How to: Away Arm a single partition system
Step Example: Away Arm
1.
[PIN] Call the NX-595E via an offsite touch-tone phone to begin the session.
2.
Press [2] for system control menu.
Press [2] for partition control menu.
Press [2] two to set in the away mode.
3.
1
st
star, moves back to system control menu.