Operation Manual

16 NX-595E User Manual


- Date
 - Partition Entry time - Independent entry times can be assigned for up to
eight partitions, values are from 10 seconds to 255 seconds
 - Partition Exit time – Independent exit times can be assigned for up to
eight partitions, values are from 10 seconds to 255 seconds
 - Phone number configuration
Alarm phone numbers 1, 2 and 3 will receive a voice message upon the
activation of certain events from within the security system. Selected events are
global, and will be mapped to all of the three phone numbers. Events are
selected by your security provider at the time of installation, or are accessible via
the NX-595E web interface.
Divert phone numbers 1, 2 and 3 will be called when an intercom call is initiated
from an outdoor station. The outdoor station must be interfaced with the NetworX
security system via the NX-595E. The NetworX security system must also be in
the armed condition.
To Configure:
 - Alarm phone number One
 - Alarm phone number Two


- Alarm phone number Three
 - Divert phone number One
 - Divert phone number Two


- Divert phone number Three

- To move back to System Configuration menu
 - Voice message recording
Recording centre for entry / exit messages and users, zones, partitions, outputs,
room and system names. The NX-595E will announce the system name when
first connected.
To Record:
 - Exit message
 - Entry message
 - User name
 - Zone name*
 - Partition name
 - Output name*
 - Room name
 - System name