Installation Instructions

UltraSync System Status Messages

The following system status messages may appear in the UltraSync application.

Zone Number / Zone Name

In alarm – This zone has triggered a system alarm condition

Is bypassed – This zone is isolated (disabled) and will not activate an alarm

Chime is set – This zone is part of the chime group

Is not secure – This zone is not closed

Fire alarm – This zone has triggered a fire alarm

Tamper – This zone has triggered a tamper alarm

Trouble fault – This zone has an open circuit

Loss of wireless supervision – This zone is a wireless device and has lost its

communication link with the control panel

Low battery – This zone is a wireless device and needs its battery changed

Partition Number / Partition Name

Is on in the away mode – This partition is armed in the away mode

Is on in the stay mode – This partition is armed in the stay mode

Is ready – This partition is secure and ready to be armed

Is not ready – This partition is NOT ready to be armed, a zone is not secure

All partitions are on in the away mode – All partitions in this multi partition system

are armed in the away mode

All partitions are on in the stay mode – All partitions in this multi partition system

are armed in the stay mode

All partitions are ready – All partitions in this multi partition system are secure

and ready to be armed