Installation Instructions

Receiver Account (optional): This field accepts up to 6 Hex digits. If this field is

programmed, all events sent to the receiver will use this account code. If this field is

left blank, the 595E will use the account code that is programmed into the NetworX

panel when reporting events. This field in generally used when PSTN for failover

reporting is enabled and is used to differentiate event delivery via IP or PSTN.

Receiver Supervision Time: The desired time interval in seconds that the

supervision heartbeat is sent to the receiver. A value of 0 disables supervision.

Receiver Number: The receiver number provided by the monitoring station.

Receiver Line Number: The receiver line number provided by the monitoring

station.

Users

Note: The User configuration menu is only accessible when logged in as a Master

User. The default username (Name) is “User 1”. You must use the Master PIN that

is programmed into the NetworX panel to access this menu.

Important: It is strongly recommended that you have the security panel owner

change the default Name (User 1) for the Master User of the system at the time of

installation.