Installation Instructions

Receiver Selectors: Select the events you want to report to the IP receiver.

Receiver Format: This is the signal format for the central monitoring station.

There are four options when selecting the receiver format, disabled, UltraSync, OH

CID IP format and OH SIA IP format.

Disabled: IP Event reporting to the monitoring station is disabled, PSTN reporting

is used. UltraSync capabilities are still available to the installer and end users.

UltraSync: When the UltraSync format is selected, reporting to the monitoring

station is routed through the UltraSync cloud infrastructure. Once the NX-595E is

installed and a connection is made to the Internet, the NX-595E must be

provisioned in the UltraSync Portal before event reporting will be routed to the

monitoring station. Integration of network routers in the monitoring station is

required. Contact your Interlogix account representative or monitoring station for

more details.

OH CID and SIA IP format: If your monitoring station already supports Osborne

Hoffman (OH) NetRec software, the NX-595E can report immediately without any

further integration. Select the appropriate format (CID or SIA) that is supported in

the monitoring station. You will be presented with the following configuration

options:

Receiver Address: The IP address of the Osborne Hoffman receiver.

Receiver Port: The port number of the Osborne Hoffman receiver.