Installation Instructions

Output Settings

The two onboard relays can be controlled through various system events or

manually controlled by a user from the UltraSync application.

Relay trigger events are selectable and can be chosen from a drop down

“Activation Event” list from within the web interface.

Activation Event: Select the required event from the drop down list that will

activate the corresponding relay.

Activation Time: Time the relay will be active, options 0-255. Default value is in

seconds unless Minutes option is checked.

Minutes: On if output should be timed in minutes; off if timed in seconds.

Latch: On if output should latch permanently until turned off; off if output should be

timed.

Code Reset: On if output should stop timing upon code entry; off if output should

follow timer.

Invert: On if output should be inverted.

Output Partitions: Is used to select the partition(s) the event must occur within

before the output will activate.

Open Schedule: On if output should only activate between the opening and closing

time.