Installation Instructions

20 © 2015 UTC Fire & Security Americas Corporation, Inc. All rights reserved.
Gateway: IP address of the gateway device (e.g. WiFi router, DSL or cable
modem). If Enable DHCP is unchecked, this field is editable and the IP address of
the gateway can be assigned manually in the NX-595E.
Subnet Mask: Subnet mask of the local area network (LAN). If Enable DHCP is
unchecked, this field is editable and the subnet mask can be assigned manually.
Primary DNS: IP address of the primary DNS server (editable if Enable DHCP is
unchecked).
Secondary DNS: IP address of the secondary DNS server (editable if Enable
DHCP is unchecked).
SSL Port: Not used.
Web Access Passcode: This code allows the UltraSync iPhone and Android
applications to connect to the security system, and enables email and IP reporting.
A value of 00000000 disables UltraSync application support. Enter a unique Web
Access Passcode (eight numerical digits only) and click the Save Config button to
enable UltraSync application support. Record the Web Access Passcode on the
back of the UltraSync Quick Reference Guide.
Web Access Server 1: This server address should not be changed. It enables the
remote web access, UltraSync iPhone and Android applications and email services.
Web Access Server 2: This server address should not be changed. It enables the
remote web access, UltraSync iPhone and Android applications and email services.
DLX900 Port: Enter the port number for DLX900 access. Default value 41796.