Installation Instructions

Network Settings

MAC Address: Media Access Control address (MAC address) is a unique identifier

assigned to most network interface cards by the manufacturer for identification.

Host Name: Fixed as “NX595E.”

Enable DHCP: When enabled, the NX-595E will automatically receive its IP

address from the network router. If this segment is disabled, the NX-595E will need

to have its IP address set manually. It is recommended that DHCP be enabled.

Enable Ping: The “Ping” command is always functional while the NX-595E is in

program mode. Disable this option to allow the NX-595E to ignore "ping"

commands in normal operation. For security reasons it is recommended this option

be disabled.

Enable NTP Server Time Updates: The NX-595E will check its internal clock and

use the internet to compare it against GMT time. This is done every 15min and will

update itself if the variance is greater than 3 minutes.

Enable DLX900 Server: Allows remote configuration using DLX900 software.

Disable to prevent DLX900 connections to the NX-595E. Enabled by default and for

the first 5 minutes after power up. Note that this option does not prevent DLX900

connections to the panel via PSTN, disable this in panel programming if required.

Enable Web Access: When enabled, email and IP reporting will function.

Alternatively, if the Web Access Passcode is set to a non-zero value, email and IP

reporting will function.

IP Address: IP address of the NX-595E module. If Enable DHCP is unchecked,

this field is editable and a static IP address can be assigned manually.