Operation Manual

OPERATING INDIVIDUAL AREAS IN THE MULTI-PARTITION MODE
Enter a code that is a valid arm/disarm code for the area you wish to operate. The following display
will appear on the LCD screen.
Only the areas authorized by this code will appear.
To toggle between the armed and disarmed states of an individual area, press [r] [Area number].
To operate an individual area, enter the number of the partition you wish to operate. The LCD keypad will
now operate as a single area keypad. All keys and functions entered will affect this individual partition
only. The lights and display represent the status of that partition only. The word "System" will be replaced
with the word "Area #". The following is an example of this feature. To exit this screen, press [#].
1 2 - 4 - - 7 8 Disarm 
- - 3 - 5 6 - - Arm 
Area 5 Ready
Type code to arm
Area 5 is selected and Area 5 is ready to arm. To exit the
individual partition mode, enter [#]-[#].
SILENCING ALARMS IN THE MULTI-PARTITION MODE
If the keypad is sounding an alarm or the siren is running, it can be silenced by entering a code with the authority
for the area(s) that are in alarm. NOTE: The
[BYPASS], [AWAY], [STAY] and [NIGHT] keys will only work if
an individual partition is selected.
NX-1248E User manual Page 21 16/04/05