Operation Manual

Below is a listing of what each digit means in a service condition.

LIGHT PROBLEM

SYSTEM FAULT - Press the [1] key. The zone light(s) that is

illuminated corresponds to the system fault(s) below:

1 Over Current Fault

2 Siren Trouble

3 Box Tamper

4 Expander Power

5 Expander Low Battery

6 Expander Box Tamper

7 Expander Trouble

8 Ground Fault

Note: Faults 1 & 2 are global in nature and will affect all

partitions of a multi-partition system. Press the [#] key to

return to the 1 of 8 service lights.

2 ZONE TAMPER - Press the [2] key and the zone light(s) will

illuminate showing the zone(s) that are tampered. Press the [#] key

to return to the 1 of 8 service lights.

3 ZONE LOW BATTERY - Press the [3] key. The zone light(s) will

illuminate showing which zone(s) has a low battery. This only

applies to wireless zones. Press the [#] key to return to the 1 of 8

service lights.

4 ZONE LOSS OF SUPERVISION - Press the [4] key and the zone

light(s) will illuminate showing which zone(s) has loss of

supervision. This only applies to wireless zones. Press [#] key to

return to the 1 of 8 service lights.

5 ZONE TROUBLE - Press the [5] key and the zone light(s) will

illuminate showing which zone(s) has a trouble condition. Press the

[#] key to return to the 1 of 8 service lights.

6 N TELEPHONE FAULT - Press the [6] key. The zone light(s) that is

illuminated corresponds to the system fault(s) below:

6 Line Trouble / Line Cut - This light will illuminate when there is

telephone line trouble or the telephone line has been cut. The

service light will remain lit until the telephone trouble clears

and a user code is entered.

7 Auxiliary Comm Device Fail - Backup has failed.

7 N FAILURE TO COMMUNICATE - This light will illuminate when there

is a failure to communicate between your system and the central

station.

8 N LOSS OF SYSTEM TIME - This light will illuminate when there has

been a loss of power and your system clock needs to be reset.

EXIT Press the [#] key to exit the Service Light mode.

N Note: This fault is global in nature and will affect all partitions

of a multi-partition system.

NX-1208E-ICON User manual Page 7 16/04/05