Operation Manual

Setting the system clock
Step 1 Enter [r][9][7].
Step 2 Enter [master code].
Step 3 Enter the “hour code” which must be two (2) digits.
Note: The clock is a 24-hour clock. Refer to the following table.
Time Hour Code Time Hour Code Time Hour Code
12:00 Midnight 00 8:00 AM 08 4:00 PM 16
1:00 AM 01 9:00 AM 09 5:00 PM 17
2:00 AM 02 10:00 AM 10 6:00 PM 18
3:00 AM 03 11:00 AM 11 7:00 PM 19
4:00 AM 04 12:00 Noon 12 8:00 PM 20
5:00 AM 05 1:00 PM 13 9:00 PM 21
6:00 AM 06 2:00 PM 14 10:00 PM 22
7:00 AM 07 3:00 PM 15 11:00 PM 23
Step 4 Enter the “minutes code” which must be two (2) digits.
Example: 7 minutes after would be entered [0] – [7].
Setting the system date
Step 1 Enter [r] [9][6].
Step 2 Enter [master code].
Step 3 Enter the “Day of Week “
1 = Sunday 3 = Tuesday 5 = Thursday 7 = Saturday
2 = Monday 4 = Wednesday 6 = Friday
Step 4 Enter the “Month Code”. Must always be two (2) digits.
01 = January 05 = May 09 = September
02 = February 06 = June 10 = October
03 = March 07 = July 11 = November
04 = April 08 = August 12 = December
Step 5 Enter the “Day Code”. Must always be two (2) digits.
Example: The 5
th
would be entered as [0] – [5].
Step 6 Enter the last two digits of the “Year Code”.
Example: For 2003 enter [0] – [3].
Setting the keypad lighting
Step 1 Press [r]-[9]-[1]. The service light will flash
Step 2 Press the [1] and [2] keys to lighten or darken the illumination behind the buttons. It is usually
easier to set this adjustment in a darkened room.
NX-1208E-ICON User manual Page 15 16/04/05