Instructions

14. Change Passcode
All users can change their own passcode.
1. Ensure that "User Menu 1 " is selected.
2. Press 4 to select the Change Passcode option.
3. Enter your new passcode and press [.
4. A high pitched multi-tone indicates that the new passcode
has been accepted. A low tone indicates that the
passcode is already in use and has not been accepted. Try
again with a different num ber.
15. Enable Chime
The enable chim e option allows a user to switch the chim e
facility on or off. This will only affect circuits that have been
program m ed as chim e in "User Menu 2 " option 5.
1. Ensure that "User Menu 1 " is selected.
2. Press 5 to select the Chim e option.
3. Press 0 to toggle the Chim e ON or OFF.
4. Press [ to accept.
16. Omit 24hr Group
This option allows 24 Hour, circuits to be om itted when the system
is unset so that they will not alarm if activated but will alarm if
tam pered with. Only the circuits program m ed by the engineer or
m aster user ("User Menu 2 " option 6 ) will be om itted.
1. Ensure that "User Menu 1 " is selected.
2. Press 6 to select the 24Hour Om it option.
3. The display will show "CCTS ISOL" (circuits isolated)
4. Enter your passcode to reinstate the om itted circuits.
17. User Menu 2 (master user only)
The m aster user m ay access this m enu by pressing [ when "User
Menu 1" is selected. Options 4 to 9 are only available to the
m aster user if program m ed by the installation com pany.
7
TS700 LED User Operating Instructions
OFF
The Chim e option is off. Press [0 ]
to change.
ON
The Chim e option is on.
CCTS
ISOL
24hour circuit isolated. Enter
passcode to cancel.
2 -
‘User Menu 2 ’ selected.
----
Waiting for new passcode.
2305
New passcode 2305 entered.
Press [ENT] to accept.