Instructions

User Menus Quick Reference
] Return To Open - Abandons "User Menu 1" and returns the system to the unset
(OPEN) condition.
1 Bell Test - Allows the internal sounders, external sounder and strobe to
be tested
2 Walk Test - Allows all detection circuits to be tested without generating
an alarm .
3 Rem ote Reset - Reset the system by exchange of 4 digit codes.
4 Change Passcode - Change your passcode.
5 Enable Chim e - Enable or disable the chim e option.
6 Om it 2 4 Hour Group - Om it a pre-defined group of 24 Hour circuits.
7 Om it Circuits - Select circuits to be om itted before setting the system .
8 Silent set - Select "silent" full set or part set.
0 Full-set - Full set the system .
A Part-set Group A - Part set the system with group A om itted.
B Part-set Group B - Part set the system with group B om itted.
C Part-set Group C - Part set the system with group C om itted.
[ User Menu 2 - Select "User Menu 2" (m aster user only).
1 View Circuits - View the status of all detection circuits.
2 Change Tim e - set the system clock.
3 Change Date - set the system date.
4 Define User Passcodes - Define, delete user passcodes.
5 Change Chim e Circuits - Select circuits that will chim e.
6 Change 24hr Group - setup a group of 24 Hour circuits that can be om itted.
7 Print System Log - Print the contents of the system log (20 0 events).
8 Configure Part-set Groups - Configure part-set groups A, B & C.
9 View System Log - View the contents of the system log.
] User Menu 1 - Return to "User Menu 1 ".
☞
Options 4, 5 , 6, 7 , 8 & 9 in ‘User Menu 2 ’ are only available if programmed by the
installation company.
5
TS700 LED User Operating Instructions
1 1
.
58
The system is unset, the display shows the
current tim e. Enter user passcode.
Func
The display shows "Function". Press [ within 5
seconds to select "User Menu 1".
1 -
"User Menu 1" selected.
2 -
"User Menu 2" selected.
This manual is found at www.eaglesecuritysolutions.co.uk