Instructions

8. Unsetting
Enter the prem ises via the norm al entry route and go directly to
the keypad. Enter your passcode. The display will show "OPEN"
and then revert to displaying the current tim e. The sounder will
sound at entry and will stop when the system is unset. If the entry
time is exceeded an internal alarm is generated and the entry
timer is restarted. If at the end of the second entry tim er the
system has not been unset a full alarm will occur.
9. Unsetting after an Alarm
Enter the prem ises via the norm al entry route and go directly to
the keypad. Enter your passcode. The sounder will sound at entry
and will stop when the passcode is entered. The display will show
the circuit that caused the alarm and the system m ust be reset.
10. Resetting after an Alarm
Your system is program m ed as EITHER User Reset or Engineer
reset, consult your installation com pany if you are not sure.
User Reset
1. Enter your passcode.
2. Press ] within 5 seconds.
3. The display will show "OPEN" and then revert to the current
time.
Engineer Reset
1. Enter your passcode.
2. Press ] within 5 seconds.
3. The "CALL ENG" m essage is displayed and the engineer
m ust now be called to reset the system .
Remote Reset
1. Enter your passcode.
2. Press [ within 5 seconds, the display shows "1 -".
3. Press 3, the display will show a four digit ‘seed’ code.
4. Telephone your central station or installation com pany and
quote the "seed" code. They will quote you a four digit
"Reset" code in return.
5. Enter the "Reset" code and press [. Alow tone indicates the
"Reset" code was either incorrect or incorrectly entered. A
high tone indicates the code was accepted.
6. Press ] to return to the "OPEN" condition.
4
TS700 LED User Operating Instructions
0023
Enter passcode before entry
timer expires.
OPEN
System is now unset (OPEN).
CA
.
03
Circuit Alarm 03 .
OPEN
System is now reset.
CALL
ENG.
System requires an engineer to
reset or Rem ote Reset.
1 -
"User Menu 1" selected.
8302
The four digit "seed" code. Note:
This code is only an exam ple.
2843
The four digit "Reset" code
entered.