Instructions

24. Print System Log
A printer m ay be connected to produce a print-out of the last
200 system events.
1. Ensure that "User Menu 2 " is selected.
2. Press 7 to select the Print Log option.
3. Enter the num ber of events to be printed.
4. Press [ to start printing. To stop printing select the m enu
again and enter 000 as the num ber of events to be printed.
25. Configure Part Set Groups
When the system is part-set certain circuits are om itted. This
option allows the m aster user to select those circuits to be
om itted when part-set A or B or C is selected.
1. Ensure that "User Menu 2 " is selected.
2. Press 8 to select the Part Set Groups option.
3. Select the part-set group A or B or C.
4. Circuits will be displayed as O= Om itted or A= Arm ed. Press
0 to change ("toggle" action).
5. Press [ to accept displayed status (high tone) and go to
next circuit. Circuits m ay be selected by num ber.
6. Press ] to go to step 2 and ] again to go back to "User
Menu 2 ".
26. View System Log
The time, date and nature of the last 200 events on the system
m ay be viewed starting with the m ost recent event.
1. Ensure that "User Menu 2 " is selected.
2. Press 9 to select the View Log option.
3. The most recent event will be displayed (see Table 1)
4. Press A to scroll backwards and C to scroll forward.
5. Press B to show the tim e of the event (first press), the date
(second press) the tim e in m inutes and seconds (third press)
the event again (fourth press).
6. Press ] to quit.
10
TS700 LED User Operating Instructions
CA
.
01
Log event showing ‘Circuit Alarm
01’. Press [A] to scroll back or [C]
to scroll forward. Press [B] to view
time and date.
01-A
Circuit 01 will rem ain Arm ed for
the selected part-set group.
Press [0] to change.
01-O
Circuit 01 will be om itted for the
selected part-set group. Press
[ENT] to accept.
PS -
Enter part-set group A, B or C.
---
Enter the num ber of events to
be printed. Press [ENT] to start.