Instructions

5. A high tone will indicate acceptance. A low tone sound will
indicate that the passcode is already in use.
To delete a user passcode from the system , select the user
num ber you wish to delete at step 3, then enter your own
passcode (m aster user) at step 4.
Passcode Types
Master User Code (1 )
-
This passcode allows setting and unsetting of the system and
allows entry to both user m enus.
Standard User Codes (2 -7 )
-
These passcodes allow setting and unsetting of the system and
entry to "User Menu 1 ".
Cleaner Code (8)
-
This passcode allows only setting of the system and entry to "User
Menu 1 ".
Holiday Code (9)
-
This passcode allows setting and unsetting of the system and
allows entry to "User Menu 1 ". The code is erased from the system
when the master user code is next used to unset the system .
Part Set Code A (A)
-
This passcode allows the setting and unsetting of group A.
Part Set Code B (B)
-
This passcode allows the setting and unsetting of group B.
Part Set Code C (C)
- This passcode allows the setting and unsetting of group C.
22. Configure Chime Circuits
This option is used to select the circuits that will chim e.
1. Ensure that "User Menu 2 " is selected.
2. Press 5 to select the Chim e Circuits option.
3. Circuits will be displayed as Y = chim e or N= not to chim e.
Change status by pressing 0 ("toggle" action).
4. Press [ to accept (high tone) and go to next circuit. Circuits
m ay be selected by num ber. Press ] to quit.
23. Configure 24hr Omit Group
This option allows the m aster user to select the 24 hour circuits
that will be om itted when the 24 hour om it option is selected in
"User Menu 1 " option 6 .
1. Ensure that "User Menu 2 " is selected.
2. Press 6 to select the 24Hour Om it Group option.
3. Circuits will be displayed as O= Om itted or A= Arm ed. Press
0 to change ("toggle" action).
4. Press [ to accept (high note) and go to next circuit. A low
tone indicates that the circuit cannot be om itted.
5. Circuits m ay be selected by num ber. Press ] to quit.
9
TS700 LED User Operating Instructions
01-N
Circuit 01 will not chim e. Press
[0] to change.
01-Y
Circuit 01 will chim e. Press [ENT]
to accept.
02-A
Circuit 02 will rem ain Arm ed .
Press [0] to change.
02-O
Circuit 02 will be om itted. Press
[ENT] to accept.
----
Waiting for new passcode to be
entered.
5750
New passcode 5750 entered.
Press [ENT] to accept.