Instructions

18. View Circuits
This option allows the user to view the status of each detection
circuit. The circuit status conditions are H= Healthy, A= Active,
S= Shorted or T= Tam per.
1. Ensure that "User Menu 2 " is selected.
2. Press 1 to select the View Circuits option.
3. Circuit status will be displayed.
4. Select circuits either by entering the num ber or by pressing
[ to scroll through the circuits.
5. Press ] to leave this option and return to ‘User Menu 2 ’.
19. Change Time
The system clock m ay be changed using 24 hour clock form at.
1. Ensure that "User Menu 2 " is selected.
2. Press 2 to select the Change Tim e option.
3. Enter the tim e in 24 hour notation (e.g., 18 05).
4. Press [ to accept.
20. Change Date
The system calendar m ay be changed by entering the date as
four digits representing the day and m onth e.g., 0207 is the 2 nd
July.
1. Ensure that "User Menu 2 " is selected.
2. Press 3 to select the Change Date option.
3. Enter the date as four digits.
4. Press [ to accept.
21. Setup New Users
Up to 12 users can be allocated to operate the alarm system .
The m aster user (user 1 ) can change all user passcodes. If a
passcode is entered with the first two digits reversed, a "Duress
Alarm " is generated. If this facility is not required ensure that the
1st and 2 nd digits are the sam e, (e.g., 1 123). If a passcode is
entered with the last two digits reversed, the "Access Control"
output is operated. If this facility is not required ensure that the 3rd
and 4th digits are the sam e, (e.g., 1233 ).
1. Ensure that "User Menu 2 " is selected.
2. Press 4 to select the Setup New Users option.
3. Enter the user num ber (1 to 9 or A,B,C).
4. Enter the new passcode then press [ to accept.
8
TS700 LED User Operating Instructions
----
Waiting for date entry.
0207
Date entered (02 July)
Ur -
Waiting for passcode type [1] -
[9] or [A] or [B] or [C].
----
Waiting for tim e entry.
1805
Tim e entered 18 0 5 (6 :05 pm )
03-H
Circuit 03 is Healthy
03-A
Circuit 03 is Active.