TS700 Intruder Alarm Control Panel _ ~ OPEN A 1 2 3 B 4 5 6 C 7 8 9 D ENT 0 ESC Setting the System Ent er your pa sscode XXXX th en lea ve th e pro tect ed a re a. Unsetting the System Go dire ct ly to t he ke yp ad and en ter you r p asscod e XXXX . Resetting Ent er your pa sscode XXXX f ollow ed by EN T the n 3. Te leph on e you r a larm com pan y and follow th eir instruct io ns.
Glossary Of Terms Bell Test - A facility to test the operation of the external bells, strobes and the internal sounder. Chim e - An optional facility which allows detectors or door contact devices to generate a two-tone "chim e" if activated whilst the system is unset. Digicom - (Digital Com m unicator) A rem ote signaling device fitted to the system which will transm it alarm inform ation via the telephone line to the alarm receiving centre.
TS700 LED User Operating Instructions Contents System Overview . . . . . . . . . . . . . . . . . . . . . . . . . . Operating the System 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Full Setting the System . . . . . . . . . . . . . . . . . . 3 Part Setting the System (Users 1 - 9) . . . . . . . . 4 Part Setting the System using Part Set codes . 5 setting with Circuits Om itted . . . . . . . . . . . . . 6 Silent setting . . . . . . . . . . . . . . . . . . . . . . . . .
TS700 LED User Operating Instructions Operating the System 1. Introduction System operation can only be carried out after entering your passcode. Up to twelve passcodes can be allocated and they can only be defined by the "m aster user" (user 1). Users A, B and C can only set and unset their respective areas. Entering a passcode with the first two digits reversed will cause a "Duress Alarm ". Each key press is acknowledged by the keypad sounder.
TS700 LED User Operating Instructions 4. Part Setting using Part Set Codes Ensure that all m onitored areas are secured. Enter your passcode, the exit sounder will m ake a continuous tone. If required leave via the norm al exit route and close the final exit door, (pressing the Exit Term inator button if fitted). The system is part set when the exit sounder stops, the display will alternate between the group/area which has been arm ed and the current tim e. 00.15 User passcode B entered.
TS700 LED User Operating Instructions 8. Unsetting Enter the prem ises via the norm al entry route and go directly to the keypad. Enter your passcode. The display will show "OPEN" and then revert to displaying the current tim e. The sounder will sound at entry and will stop when the system is unset. If the entry tim e is exceeded an internal alarm is generated and the entry tim er is restarted. If at the end of the second entry tim er the system has not been unset a full alarm will occur. 9.
TS700 LED User Operating Instructions User Menus Quick Reference 1 1.58 Func 1 - The system is unset, the display shows the current tim e. Enter user passcode. The display shows "Function". Press [ within 5 seconds to select "User Menu 1". "User Menu 1" selected. ] Return To Open - Abandons "User Menu 1" and returns the system to the unset (OPEN) condition.
TS700 LED User Operating Instructions User Menus 11. Introduction In addition to setting and unsetting the system , users 1 - 9 m ay carry out other operations. These are selected via two user m enus, "User Menu 1" is available to users 1 - 9 and "User Menu 2" which is only available to the m aster user. To access "User Menu 1" enter your passcode and then press [ within 5 seconds. Pressing ] returns the user to the previous position in the m enu. 12.
TS700 LED User Operating Instructions 14. Change Passcode All users can change their own passcode. 1. Ensure that "User Menu 1" is selected. 2. Press 4 to select the Change Passcode option. 3. Enter your new passcode and press [. 4. A high pitched m ulti-tone indicates that the new passcode has been accepted. A low tone indicates that the passcode is already in use and has not been accepted. Try again with a different num ber. 15. 1. Ensure that "User Menu 1" is selected. 2.
TS700 LED User Operating Instructions 18. View Circuits This option allows the user to view the status of each detection circuit. The circuit status conditions are H= Healthy, A= Active, S= Shorted or T= Tam per. 1. Ensure that "User Menu 2" is selected. 2. Press 1 to select the View Circuits option. 3. Circuit status will be displayed. 4. Select circuits either by entering the num ber or by pressing [ to scroll through the circuits. 5. 19.
TS700 LED User Operating Instructions 5. A high tone will indicate acceptance. A low tone sound will indicate that the passcode is already in use. To delete a user passcode from the system , select the user num ber you wish to delete at step 3, then enter your own passcode (m aster user) at step 4. 5750 New passcode 5750 entered. Press [ENT] to accept. Passcode Types Master User Code (1) ---Waiting for new passcode to be entered.
TS700 LED User Operating Instructions 24. Print System Log A printer m ay be connected to produce a print-out of the last 200 system events. 1. Ensure that "User Menu 2" is selected. 2. Press 7 to select the Print Log option. 3. Enter the num ber of events to be printed. 4. Press [ to start printing. To stop printing select the m enu again and enter 000 as the num ber of events to be printed. 25. --Enter the num ber of events to be printed. Press [ENT] to start.
TS700 LED User Operating Instructions AA Action alarm (Alarm output activated) Ac ** Access passcode (user code * * entered OP with the last two digits reversed) System open (unset) AD.** Alarm delayed (the system is part set Or and circuit * * was activated) Om itted circuits reinstated Au.** Auxiliary alarm from circuit * * PA.** BF Battery Fault PF Power failure (rem ote power LED flashes) BT Bell test operated Pr Power restored CA.** Circuit alarm from circuit * * PS.
TS700 LED User Operating Instructions Service Record Date Engineer Installation Com pany: Address: For Service Telephone: For Rem ote Reset Telephone: 12 Action
TS700 LED User Operating Instructions User Record User No.
Circuit Designation Record No. Location Om it Chim e A B C 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 18607 Drg No. 33:2159:00 Issue 01. Doc 02. August 98 This manual is found at www.eaglesecuritysolutions.co.
