User Guide

NTI BRANDNAME AND DESCRIPTON
3
INSTALLATION
FYI: It is not necessary to disconnect power to the CPU and monitor(s) before installation.
Monitor Connection
1. Disconnect the monitor cable at the CPU and reconnect it to the "MONITOR 1" port on the VOPEX. (See Fig. 1)
2. Plug a second monitor (or optional VEXT-xx extension cable) into the "MONITOR 2" port on the VOPEX.
Note: "xx" in VEXT-xx indicates the length of the cable in feet. Many lengths are available. Contact your VPI
salesperson or visit us at our website at http://www.vpi.us for details.
Mouse Connection
1. Disconnect the mouse at the CPU and reconnect it to one of the female USB type A 'USER 1 DEVICES" ports on the
VOPEX.
2. Connect a second mouse (or optional USB extension cable NTI USB-A+A-5M) to the female USB type A "USER 2 DEVICES"
ports on the VOPEX.
Keyboard Connection
1. Disconnect the keyboard at the CPU and reconnect the keyboard to the remaining female USB type A "USER 1 DEVICES"
port on the VOPEX.
2. Connect a second keyboard (or optional USB extension cable NTI USB-A+A-5M) to the remaining female USB type A "USER
2 DEVICES" ports on the VOPEX.
Figure 1- Connect User 1 Keyboard, Mouse, and Monitor
Rear View of VOPEX-USBV-2
5VDC
2A
-
+
CPU
USER 1
DEVICES
MONITOR 1
VIDEO
USER 2
DEVICES
NTI
Tel:[phone]
Fax:[phone]
1275 Danner Dr
Aurora, OH 44202
www.n ti1.com
MONITOR 2
DEVICE 3 DEVICE 2 DEVICE 1
HUB PORTS
15HD Female
Video Connector
USB KEYBOARD
USB MOUSE
USB Type A Female
USB Type A Male
VGA
Multi-Scan
Monitor
15HD Male
Video Connector
MONITOR 1