Installation and Operation Manual Audio/Video Matrix Switch SM-nXm-C5AV-LCD

NTI VEEMUX AUDIO/VIDEO MATRIX SWITCH VIA CAT5
27
TROUBLSHOOTING
PROBLEM:
SOLUTION:
No audio
Check all connections and power to all devices. Use the VU-Meter to determine if audio is passing through
the VEEMUX
PROBLEM:
SOLUTION:
Video not crisp & clear
Force video quality adjustment (see page 13)
PROBLEM:
SOLUTION:
No Video
Check cable connections, power to all devices, and CAT5 cable wiring (if cables were terminated by the
customer)
PROBLEM:
SOLUTION
Telnet or webserver not working
• Check indicator LEDs on the back of the unit.
• Is there a valid connection? If not, check all cable connections.
• Does the data light illuminate? Make sure the IP address is correct.
• Ensure local network connection supports and is configured for 10baseT.
PROBLEM:
SOLUTION:
RS232 control not working
Wrong serial address. Verify the address of the unit that will not communicate. Check all cable connections.
APPENDIX
Appendix A- Default Settings
SETTING DEFAULT VALUE
Login Username Administrator (case sensitive)
Login Password admin (case sensitive)
Serial Speed 9,600 bps
Serial Address 01
IP Address 192.168.1.1
Subnet Mask 255.255.255.0
Appendix B- General Information
DESCRIPTION SPECIFICATION
Interconnect Cable CAT 5/5e/6 Solid UTP EIA/TIA 568B wiring w/
male RJ45 connectors
"RS232" Connector 9D male
"ETHERNET" Connector RJ45 female
"AV IN" and "AV OUT"
Connectors
RJ45 female
Operating temperature
+10°C to +40°C
Video quality adjustment Automatic (up to 600 feet)
Replaceable fuse rating 2A 250V
Power requirements 110 or 220VAC, 50 or 60Hz, 1A
1
Mating Face
of a 9D Male
23
4
5
6
7
8
9
1
2
345
6
7
89
13
1211
10
14 15
16
17
18
19 20
21 22 23 24 25
Mating Face of DB25 Male