Switch User Manual

NTI RACKMUX KVM Drawer with NODEMUX Switch

Figure 11- Command Mode menus

Command Mode (Cont'd)

Function: Keystroke:

Sets scan time-out on

each port

Selects a specific port

Enters Search Mode and adds a character

to search string and selects the CPU’s

name that matches best.

Selects the first port on the switch

Selects the last port on the switch

Display Help Menu

Switch to a selected port

Exit OSD Command Mode

The mouse can also be used to control the NODEMUX switch within the Command Mode menu.

• The mouse cursor can be moved to the Scan, Help, Broadcast, Timeout, Maintenance and Exit fields where the user

can then click on the left mouse button to perform that function.

• Ports listed on the screen can be selected by moving the cursor onto that port and clicking. Clicking twice on a

selected port will switch to that port and exit Command Mode.

• To change the displayed ports on the screen simply click on the up and down arrows located to the right of the port

names displayed.

End

Enter

Home

Esc

A-Z

0-9

(Type any alphabetical or numeric character)

Press <CTRL> while in the Command Mode menu

to display the Edit, Maintenance, Port, and Timeout

control features.

Note: The user must exit Command Mode to

type to a CPU.

To exit Command Mode, either hold down any

touch-switch on the front panel for more than 2

seconds, OR press <ESC> on the keyboard.

(Pxx would be P01, P02, etc.)

(0-9)

Ctrl

(xxx from 002 to 255. ie. t002

would set the time-out period

for 2 seconds)

(0-2)

(0-9)

Ctrl