User's Manual

NTI RACKMUX Console Drawer with UNIMUX Switch

Edit Mode (Con'td)

Function: Keystroke:

Erase current character

Erase previous character

When finished making changes in Edit Mode, press <Enter> and a prompt will appear to press either <Y> to save the changes or

<N> to continue making changes without saving the changes just made. If the <Esc> key is pressed instead of <Enter>, all

changes made will be ignored and the display will return to the previous menu.

Change Settings

To enter the Change Settings menu (see Fig. 13) press <Ctrl>+<T> from the Command Mode menu.

The list below describes the Change Settings menu functions available from the keyboard:

Function: Keystroke:

Go to Broadcast Mode Configuration

Go to Scan Mode Configuration

Go to Language Selection Menu

(Option only available if the

administrator is logged in)

Change the scan dwell time period

Configure ports for MAC or non-

MAC CPUs (Administrator only)

Enable/Disable right mouse button

click emulation

Exit from Change Settings

Return to Command Mode

Figure 13- Change Settings menu

When the <T> is pressed, an edit field showing the actual value of the scan dwell time is displayed at the bottom of the Change

Settings menu. The user can introduce a new value for scan dwell time and press <Enter> to save it or <Esc> to exit. Any value

between 002 and 255 (seconds) is acceptable.

Delete

Backspace

Esc