7, NETWORK Tel:330-562-7070 TECHNOLOGIES 1275 Danner Dr INCORPORATED Aurora, OH 44202 Fax:330-562-1999 USB-ADB USB TO ADB ADAPTER INSTALLATION / USER GUIDE MAN009 REV 4/20/01
Introduction The NTI USB-ADB is a USB to ADB adapter that allows users to easily connect their MAC USB enabled computer (G3/G4) to an NTI Universal Multi Platform (ST-xU) or Universal Matrix (ST-nXm-U) KVM Switch. The NTI USB-ADB adapter fully supports keyboar d soft power ON and OFF.
Setup When using the USB-ADB adapter to connect to an NTI KVM switch: 1. Connect the male 8 pin minDIN end of the MKTINT-xx-MM cable to a female 8 pin minDIN Keyboard and Mouse input port on the NTI KVM switch being used (see Fig. 3). Switch the power ON to the KVM switch if it isn't already. 2. Connect the male 4 pin miniDIN end of the MKTINT-xx-MM cable to either of the 4 pin miniDIN female ports on the USB-ADB adapter (see Fig. 4).
Technical Specifications Mating face of a USB Type B Female 2 1 3 4 Mating Face of a 4 pin miniDIN Female 4 3 1 2 PIN # 1 2 3 4 SIGNAL +VCC - DATA +DATA GND Fig. 8 PIN # 1 2 3 4 SIGNAL DATA PWRN +5 GND Fig. 9 WARRANTY INFORMATION The warranty period on this product (parts and labor) is one (1) year from the date of manufacture (indicated on the bottom of the product). Please contact Network Technologies Inc at (800) 742-8324 (800-RGB-TECH) or (330) 562-7070 or visit our website at http://www.
