Computer Accessories User Manual

ManualsBrandsNetwork Technologies ManualsComputer AccessoriesMAN015

MAN015 Rev Date 04/20/2006

USB-SUN

USB TO SUN ADAPTER

Installation Manual

Summary of content (7 pages)

PAGE 1
USB-SUN USB TO SUN ADAPTER Installation Manual MAN015 Rev Date 04/20/2006
PAGE 2
COPYRIGHT Copyright © 2001, 2006 by Network Technologies Inc. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written consent of Network Technologies Inc, 1275 Danner Drive, Aurora, Ohio 44202. CHANGES The material in this guide is for information only and is subject to change without notice.
PAGE 3
TABLE OF CONTENTS Introduction...................................................................................................................................................................... 1 Applications ..................................................................................................................................................................... 1 Installation .......................................................................................................................
PAGE 4
NTI USB-TO-SUN ADAPTER INTRODUCTION The NTI USB-SUN is a USB to SUN adapter that allows users to easily connect their SUN USB enabled CPU to an NTI Universal Multi-Platform (ST-xU) or Universal Matrix (ST-nXm-U) KVM Switch. Materials supplied: 1 NTI USB-SUN Adapter 1 USB-AB-0,5M-5T USB Type A male -to-USB Type B male cable Cable that may be required but is not supplied: Application Connect adapter to NTI Universal Switch NTI Cable SKTINT-xx-MM Legend: xx is the length of the cable in feet.
PAGE 5
NTI USB-TO-SUN ADAPTER INSTALLATION USB-SUN Adapter to NTI KVM Switch When using the USB-SUN adapter to connect to an NTI KVM switch: 1. Connect one male 8 pin minDIN end of an SKTINT-xx-MM cable to a female 8 pin minDIN "Devices" input port on the NTI KVM switch being used (see Fig. 3). Switch the power ON to the KVM switch if it isn't already. 2. Connect the other male 8 pin miniDIN end of the SKTINT-xx-MM cable to the 8 pin miniDIN female port on the USB-SUN adapter.
PAGE 6
NTI USB-TO-SUN ADAPTER USB Type A Male Connector Front View of USB-SUN To USB Type A port USB-AB-0.5M-5T SUN CPU With USB Port USB Type B Male Connector Figure 5- Connect USB-SUN to SUN CPU with USB port Legacy SUN Keyboard/Mouse to USB SUN Adapter When using the USB-SUN adapter to connect a SUN Keyboard and/or Mouse to a SUN CPU with a USB port: 1. Connect the 8 pin minDIN male connector of the SUN keyboard and mouse assembly into the female 8 pin miniDIN port on the USB-SUN adapter.
PAGE 7
NTI USB-TO-SUN ADAPTER TECHNICAL SPECIFICATIONS Mating face of a USB Type B Female 2 Mating Face of a 8 pin miniDIN Female 1 8 4 5 3 PIN # 1 2 3 4 4 2 SIGNAL +VCC - DATA +DATA GND 6 7 PIN # 1 2 3 4 5 6 7 8 3 1 SIGNAL GND GND +5 MOUSE KYBD RCV KYBD XMT PWRN +5 WARRANTY INFORMATION The warranty period on this product (parts and labor) is two (2) years from the date of purchase.