Owner manual

5. The Select Services dialog box appears. The default selections

are TFTPD and BOOTP. Select Next to accept the defaults.

If your system has another version of

TFTP installed, you are

prompted to make the following choice:

❏ If you want to use the version of TFTP that you have

installed, or you are using an

NFS server, clear the default

selection. Then select Next.

❏ If you want to install NCD’s current version of TFTP software,

select Next.

6. Choose the

TFTP root directory path. The default root directory

path is c:\tftpboot. Type a new path or accept the default. Select

Next.

7. A dialog box reports that the

TFTP software is installed and that

you need to restart the computer. You should restart the

computer when you ﬁnish installing all of the components.

Select Ok to continue the installation.

8. The Select Components Dialog box reappears. Install

NCDware is the default. Select Next to install

NCDware.

9. Choose the default destination path for installing

NCDware,

c:\tftpboot, or type the path you wish to use. Select Next.

10. The screen displays a list of items to install. Make sure only the

correct items are selected. Select Next to continue.

11. The screen lists the

NCD terminals for which you can install

software. Make sure only the correct terminals are selected.

Select Next.