Sentry Camera Quick Guide NI-3250
Warning FCC This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Catalogue 1. What’s In The Box P. 1 2. Camera Structure P. 2 3. Insert Micro SD Card P. 3 4. Read Before Installing P. 4 5. Set Up With Netvue App 6. Sentry Camera Installation P. 5 P. 6-12 7. Status Light P. 13 8. Netvue Protect Plan P.
What’s In The Box UP Drilling Template X4 Anchors Power Adapter X4 Mounting Screws Sentry Camera Quick Guide Weatherproof Tube Quick Guide Sentry Camera 1
Camera Structure Antenna Microphone Speaker Lens Infrared LEDs Light Sensor Micro SD Card Slot Status Light Power Port 2 F Ethernet Cable Port T Wi-Fi Configuration Button
Insert Micro SD Card Sentry Camera comes with a built-in card slot which supports up to 128GB Micro SD card. Once you insert the storage card, the camera will automatically start to record and store videos in the storage card. You can view those videos on the ‘Replay’ page by clicking the ‘Replay’ button in the ‘Homepage’. Step 1: Make sure your Sentry Camera is power off. Loosen the screws and then take off the cover. Step 2: Insert Micro SD card. Make sure you insert it in the correct direction.
Read Before Installing 1. Keep the Sentry Camera and all accessories out of reach of children and pets. 2. The Sentry Camera comes with a power adapter. If you prefer other power adapter, please make sure that it allows a DC12V (≥1000mA) power supply voltage. 3. The product can only be used at normal temperature and humidity: Working temperature: -10°C - 50°C (14°F-122°F) Working relative humidity: 0-95%. 4. Please do not expose the camera lens to direct sunlight. 5.
Set Up with Netvue App Download the Netvue App from App Store or Google Play. Follow the in-app instruction to complete the entire set up process.
Sentry Camera Installation Check the following things before you start to drill holes on your wall: 1. Sentry Camera has been successfully added to your Netvue App and is able to stream video. 2. Have planned the cable route. Measured the length of the power cable and Ethernet cable (if you plan to use Ethernet connection) you will need. Step 1: Find a good installation spot. We recommend installing the Sentry camera just 7-10 feet (2-3 meters) above the ground for a better two-way audio experience.
11' 10' 9' 7-10 feet (2-3 meters) 8' 7' 6' 5' 4' 3' 2' 1' 7
Step 2: If you are going to install camera on wood, just skip this step. If you are going to install camera on concrete or brick: Before you start to drill, make sure you know the locations of wall-in pipes and electrical wires. (If you are not comfortable with drilling holes, please consult with a licensed electrician.) Use the provided drilling template to mark the position of holes on your wall. Use drill bit (15/64", 6mm) to drill four holes, and then install anchors to hold screws.
Step 3: Loosen the security screw and take off the backplate, then install it on the wall by provided mounting screws.
3 10
Step 4: Hang Sentry Camera on the backplate, then tighten the security screw.
Step 5 (Wired Connection): Read this step if you are using wired connection, otherwise skip this step. A weatherproof tube is needed for Ethernet cable to avoid leaking water into Ethernet cable port. Insert the cable into the weatherproof tube, and then connect it to the Ethernet cable port of Sentry Camera. Make sure the cable works before installing.
Status Light Netvue Sentry Camera uses status light to indicate the device status.
Netvue Protect Plan Netvue Protect Plan provides optional advanced features for those with higher security needs, and each plan supports multiple devices. Continuous Video Recording: It allows for non-stop recording of all the action, and captures everything in the background, you can rewind to catch anything you missed. Event Video Recording: It automatically records a video clip, not just several still pictures, and push it to your phone instantly, keeping you always stay in the know anywhere, anytime.
Manufacturer's Name: Netvue Technologies Co.,Ltd. Address: Room A501‐502,Academy of Aerospace Technology,10 Kejinan Road, Nanshan District,Shenzhen,China,518057 Product Name: Sentry Camera Trade Mark: Netvue Model number: NI‐3250, NI‐3251,NI‐3252,NI‐3253,NI‐3254,NI‐3255, NI‐3256,NI‐3257,NI‐3258,NI‐3259 Operating Temperature: -10° C to 50° C This device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
DECLARATION OF CONFORMITY I hereby declare that the product Product name: Sentry Camera Model name: NI-3250, Series model : NI-3251,NI-3252,NI-3253,NI-3254,NI-3255, NI-3256,NI-3257,NI-3258,NI-3259 HW: J14IP SW: 5.10.
Point of contact: Netvue Technologies Co.,Ltd.
Feel free to contact us for additional help: Netvue Web Client support@netvue.com in-App Chat @NetvueTech Netvue Forum netvue.com/community 1(866)749-0567 www.netvue.com 240 W Whitter Blvd Ste A, La Habra, CA 90631 © 2010-2020 Netvue Technologies Co., Ltd. All Rights Reserved.
