User Manual

8
4.6. Restore To Factory Setting
Z602A will keep network information while losing power, including to store the network
address that it was assigned etc. If Z602A needs to join a new network, it would need to go back
to factory default first.
Operation:
If you want the device go back to factory default, powered up the device while pressing the
setting key, and the status indicator will flash quickly and make the doorbell sound twice. After
going back to factory default, re-power up the device, and the device should be able to join the
network.
4.7. Others
4.7.1 Identify
The device can be identified through the APP, the status indicator will flash 5 times and then
return to a steady light.
4.7.2 Announce
Press setting key and the device would send out announcement to the network, and the network
indicator would flash for 5 times.
4.7.3 Enroll
When the device is turned on, device would determine whether it has been ENROLL.
If it is not ENROLL yet, it would go through the ENROLL process automatically.
If ENROLL is successful, the status indicator would flash 6 times.
If it failed, the status indicator would flash 4 times.
If the device has already been ENROLL, then this process would not be gone through, but the
status indicator would still flash 6 times.
The device will send relevant device information to all ENROLL devices every hour to ensure that
the devices keep in touch (heartbeat default setting is 1 hour, setting range: 30 seconds - 7 days)