User Manual

6
will stay OFF.
In the process of joining, if you press the binding key again, it would turn off permit-join
function, and the indicator will stay on.
4.4. Binding
Z602A can be bound with Z312 to work as a doorbell.
Step1. Press and hold the Binding Key for 3 seconds.
Step2. Release the Binding Key when the network indicator flashes once.
Step3. Z602A would send out binding request, and Z312 would also need to send out
binding request.
Step4. The indicator flashes 5 times means that the binding is completed; otherwise, it will
flash 10 times.
After the binding is complete, when Z312 is triggered, Z602A would make a doorbell
sound.
4.5. Alarm
4.5.1 Type of alarm and the hint of alarm light flashing
Z602A can be an alarm in IAS system, it can generate 4 different sounds:
A. Fire Alert
B. Emergency Alert
C. Burglar Alert
D. Doorbell Sound
The priority level from high to lowFire = Emergency = Burglar > doorbell
Fire alarm, emergency alarm and burglary alarm have the same priority level and can cover each
other, if it is a doorbell, it cannot cover the other three
Ex.1 When the priority level of alarm that triggered at the same time are equal, the alarm will