User Manual

10
6. Flashing indicators and alarm sound
Powered on Network Indicator flashes once with 1 sound
Join the network successfully Network Indicator stays ON with 1 long sound
Failed to join the network Network Indicator stays OFF
Permit-join feature is enabled Network Indicator flashes for 60 seconds
Enroll in the security system successfully Status Indicator flashes 6 times
Failed to enroll (there is a CIE device in the network) Status Indicator flashes 4 times
Failed to enroll (there is no CIE device in the network) Status Indicator flashes twice
Binding feature is enabled Status Indicator flashes once
The binding is successful Status Indicator flashes 5 times
The binding is failed Status Indicator flashes 10 times
Restoring Status Indicator flashes 3 times with 2 doorbell sounds
Restore is completed Status Indicator generates fast flashes
Identify Status Indicator flashes 5 times
Disarm Alarm Indicators flash twice with 2 short sounds
Arm Alarm Indicators flash once with 1 long sound
Announce Network Indicator flashes 5 times
Fire/Burglar/Emergency alarm Alarm Indicators flashes with Fire/Burglar/Emergency alert
Doorbell Alarm Indicators flashes with doorbell sound
0x0011
PhysicalEnvironment
8-bit Enumeration 0x00 –0xff Read/write 0x00 O
0x0012 DeviceEnabled Boolean 0x00 –0 0x01 Read/write 0x01 M