User Manual

4
4. Set up Instruction
On/Off
Power on Insert batteries. (users may need a flat blade screwdriver to open)
Turn on Press and hold the function key for 3 seconds till the green indicator flashes once.
Turn off
(Restore to factory setting)
Press and hold the function key for 5 seconds till green indicator flashes 20 times.
Power off Remove Batteries.
Note
1.The device will be off after removing the battery and insert it again.
2.It is suggested to wait for at least 10 seconds between turning the device on and off.
3.At 1
st
-5
th
second after power on, the device will be in engineering test mode.
Network Joining
If the device has never joined
the network
Turn on the device, and it will search for the network to join.
The green indicator light stays on for 5 seconds: joins the network successfully
The green indicator light remains off: fail to join the network
If the device has joined the
network and it is not set to
default
Turn on the device, and it will search for the previous network to join.
The green indicator light stays on for 5 seconds: joins the network successfully
The green indicator light remains off: fail to join the network
If the device fails to join the
network
(when the device is turned on)
Note: It is suggested to remove the batteries if the device is not in use to save power.
It is suggested to check the device verification information on the gateway
or consult your platform server provider when the device fails to join the network.
Function Key
Press the function key and hold
the pressing for 5 seconds
The device will be set to default and turned off
The green indicator light flashes 20 times: success
The green indicator light remains off: fail
Press the function key once
The device is in the network: green indicator light flashes once and sends a report
The device is not in the network: green indicator light remains off
Sleeping Mode
The device is turned on and in
the network
Sleep period: Min Interval.
When the reportchange exceeds setting value or the state changes: send a data report according to
Min Interval.
The device is turned on but not
in the network
Note: Suggest to remove batteries if the device is not used.
Suggest to check device verification on gateway.