Model: R207C Wireless IoT Controller with external antenna Wireless IOT Controller with external antenna R207C User Manual Copyright© Netvox Technology Co., Ltd. This document contains proprietary technical information which is the property of NETVOX Technology. It shall be maintained in strict confidence and shall not be disclosed to other parties, in whole or in part, without written permission of NETVOX Technology. The specifications are subject to change without prior notice.
Table of Content 1. Introduction ....................................................................................................................................... 2 2. Product Appearance .......................................................................................................................... 2 3. Main Characteristics ......................................................................................................................... 3 4. Installation and Preparation ..............
1. Introduction R207C is a smart IoT gateway. R207C can communicate with Netvox LoRa network and act as a gateway in LoRa network. It can automatically add the LoRa device into the network and is adopted CSMA/CA mechanism and AES128 encryption method to improve security. R207C is the control center of Netvox LoRa Private. It can work with Netvox M2 APP to monitor the information of the device easily. Netvox LoRa private frequency is as follows: 500.1 MHz_China Region China 920.
3. Main Characteristics ⚫ The LoRa communication distance is up to 10km (depend on specific environment) ⚫ Support Netvox LoRa Private ⚫ Support Netvox Cloud ⚫ Support M2 APP 4. Installation and Preparation 4.
4.2 WAN/LAN Connection The network source connects to the RJ-45 port (WAN/LAN). The network source supports static IP and DHCP client. If user needs an external IP Camera, please connect it to another router on the same network segment 4.3 Power on Plug in the 5V/1.5A transformer to boot 4.4 Reboot In the power-on state, press the reset button at the bottom to restart R207C *If press the button for more than five seconds, it will restore to the factory setting. 4.
5.2 Inquire R207C IP Address Open a web browser, log in to the router setting interface of the network source, and find the DHCP List to see the R207C IP address and MAC Address. According to the IP address of R207C in the list, user can log in to the R207C setting interface. *The above network source setting screen is Netvox R206. The location of the DHCP client of routers from other manufacturers may be different. 5.3 Login R207C management interface Please fill in R207C IP address in the URL bar.
Default username and password (Applicable to versions after 0.0.0.
*It is recommended to change the password immediately after logging in for the first time to improve network security *Before version 0.0.0.83, the administrator’s username and password are operator, the customer’s username and password are admin. *If user wants to log in to the R207C page, the computer must be in the same network segment as the network source to access.
6. Gateway Function Description 6.1 Status Click [Status] in the left list to view system information and network information 6.2 Internet Settings Click [WAN Interface] in the left list, and user can modify the network information, such as WAN Access Type, etc.
6.3 Administration 6.3.1 Statistics This page shows the packet counters for transmission and reception regarding to wireless and Ethernet networks. 6.3.2 Time Zone Setting You can maintain the system time by synchronizing with a public time server over the Internet. The default NTP Server such as the following: NTP Server1：ntp7.aliyun.com NTP Server2：time.stdtime.gov.tw NTP Server3：time.windows.
6.3.3 Denial-of-Service R207C do not support this function. 6.3.4 System Log R207C do not support this function. 6.3.5 Upgrade Firmware This page allows you upgrade the gateway firmware to a newer version. Please note, do not power off the device during the upload because the system might crash. *Do not turn off the power during the firmware update 6.3.6 Save/Load Setting This page allows you save current settings to a file or reload the settings from the file which was saved previously.
6.3.7 Password The login account and password of the administrator and customer can be changed. The password must be greater than or equal to 6 digits. It cannot be the same as the account and cannot be 123456. Default username and password (Applicable to versions after 0.0.0.
6.4 Smart Home 6.4.1 Device List Click [Device List] to view current device information, including Device ID (IEEE), Device name, online/offline status, etc. * When using for the first time, please power on the end device one by one and refresh the device list to see if all items appear on the list Click [Detail] to view the detail device information.
Click [Delete] to delete the device. 6.4.2 Device Management Click [Device Management] and “Add Devices” will appear. Please enter the IEEE (DevEUI) of the device that will be added. After filling, click [Add Device], and the network will start. Each time that can join in the network is 60 seconds, and the user can refresh the device list to view whether the device has joined in the network. *Operation tip: Reset device to factory default and power off, then input the device's IEEE Add.
6.4.
6.4.4 Upgrade Module Please select a file for upgrading LoRa Module firmware and click on the button of Upgrade *Do not turn off the power when updating the LoRa Module firmware. 6.4.5 Data Management Click “OK” under [backup data] to back up user data and can back up to the cloud.
In [restore data], user can restore the backup data. Click the blank box of [Cloud Restore] and select the data during the backup period that want to query, and then click the "Search" button. All the backup data during this period will be listed. Then, click the one you want to restore, it will load the cloud backup data. *This method is also suitable for data restoration operations when the gateway is abnormally replaced by a new gateway.
6.4.6 Communication Setting ▼ Amend Secret Key □ Https: Https transfer protocol □ Timestamp authentication: The timestamp verification is enabled according to the factory setting and can communicate normally within about 10 minutes (600000ms). When the gateway time and the computer time are incorrectly deviant by 10 minutes, it will appear timestamp verification time-out.
▼ Cloud Link Cloud state span: cloud connection state IP address and port of the cloud proxy server: mngm2.netvoxcloud.com:80 (for overseas) * Modifying to another URL may cause the gateway failing to connect to the cloud. * If the network is normal and the cloud URL is entered correctly, but it still fails to connect to the cloud, please check whether the [Time Zone Setting] is consistent with the computer system time.
6.4.7 System Settings Enable https and timestamp, set cloud proxy server or MQTT A. https Enable/ Disable https B. Timestamp authentication The factory setting defaults that “Timestamp authentication” is selected. If the gateway time is incorrectly deviated by 10 minutes from the local time, the timestamp authentication will be timeout. The factory setting defaults that timestamp authentication is 10 minutes.
7. Important Maintenance Instructions Kindly pay attention to the following in order to achieve the best maintenance of the product: • Keep the device dry. Rain, moisture, or any liquid might contain minerals and thus corrode electronic circuits. If the device gets wet, please dry it completely. • Do not use or store the device in dusty or dirty environment. It might damage its detachable parts and electronic components. • Do not store the device under excessive heat condition.
