User's Manual

9
5.10. Summary of Notification
Powered on Network Indicator flashes once with 1 sound
Join the network successfully Network Indicator stays ON with 1 long sound
Failed to join the network Network Indicator stays OFF
Permit-join feature is enabled Network Indicator flashes for 60 seconds
Enroll in the security system successfully
Status Indicator flashes 6 times
Failed to enroll (there is a CIE device in the
network)
Status Indicator flashes 4 times
Failed to enroll (there is no CIE device in the
network)
Status Indicator flashes twice
Binding feature is enabled
Status Indicator flashes once
The binding is successful
Status Indicator flashes 5 times
The binding is failed
Status Indicator flashes 10 times
Restoring
Status Indicator flashes 3 times with 2 doorbell sounds
Restore is completed Status Indicator generates fast flashes
Identify
Status Indicator flashes 5 times
Disarm
Alarm Indicators flash twice with 2 short sounds
Arm
Alarm Indicators flash once with 1 long sound
Announce
Network Indicator flashes 5 times
Battery is low-power without DC 12V
Status Indicator flashes 20 times
Battery is low-power with DC 12V (recharging) Alarm/Status Indicator stays ON
Battery is fully charged Alarm/Status Indicator is OFF
Fire/Burglar/Emergency alarm Alarm Indicators flashes with Fire/Burglar/Emergency
alert
Doorbell Alarm Indicators flashes with doorbell sound
All saved text messages are deleted
Status Indicator flashes twice
GSM module receives a call
Status Indicator flashes once
Text format is correct, but it is failed to arm/disarm
Status slowly flashes 3 times
Wrong text format
Status rapidly flashes 3 times
6. Home Automation Clusters for Z602B
A cluster is a set of related attributes and commands which are grouped together to provide a specific function. A
simple example of a cluster would be the On/Off cluster which defines how an on/off switch behaves. This table
lists the clusters which are supported by Z602B.
1. End Point(s)：0x01:
2. Device ID：IAS Warning Device（0x0403）
3. EndPoint Cluster ID
Server side
Client side
EP：0x01 (Device ID：IAS Warning Device（0x0403）)
Basic(0x0000)
IAS ACE(0x0501)
Identify(0x0003)
IAS WD(0x0502)
None