User's Manual

5. Setting up Z602B

5.1. Join the ZigBee Network

After Z602B is powered on, it will search for an existing ZigBee network and send a request to join the

network automatically. While Z602B is under the coverage from a coordinator or a router whose permit-join

feature is enabled, Z602B will be permitted to join the network. Typically, the default permit-join period of

time is 60 seconds. Please refer to the following steps to complete the join:

Step1. Enable the permit-join function (valid for 60 seconds) of a coordinator or a router (please refer to

the user manual of the coordinator or the router to enable the permit-join feature).

Step2. Power on Z602B. It will start to search and join the network.

After Z602B is joined successfully, the Network Indicator will flash once and then stay ON. Moreover, it will

generate a long sound. When it is failed to join the network, the indicator will stay OFF.

5.2. Permit-Join

Z602B is designed to work as a router. To allow other devices to join the ZigBee network, users could enable

the Permit-Join feature using the tips:

A. Press the Binding Key to enable the Permit-Join feature. The Network Indicator will flash per second.

B. The default Permit-Join period of time is 60 seconds.

5.3. Binding

Z602B can be bound with Z312 to work as a doorbell.

Step1. Press and hold the Binding Key for 3 seconds.

Step2. Release the Binding Key when the network indicator flashes once.

Step3. Enable the binding feature of Z312.

Step4. The indicator flashes 5 times after the binding is completed; otherwise, it will flash 10 times.

5.4. Enroll in the ZigBee Security System

Z602B is a Warning Device in the ZigBee security system. Right after Z602B join the ZigBee network, it will

automatically find out a CIE (Control and Indicating Equipment) device (i.e. Netvox Z201B) and send a

registration request to the CIE device to enroll in the security system. The enrollment has these 3 situations:

A. There is no CIE device or no compatible CIE device in the network → the Status Indicator flashes

twice.

B. There is a compatible CIE device in the network, but it is failed to enroll → the Status Indicator

flashes 4 times.

C. The enrollment is completed → the Status Indicator flashes 6 times.