User's Manual

y 1 → the phone numbers Z602B will call out when the alarms occur. The phone number doesn’t

need to include the country code. Maximum length: 16 digits.

y 2 → the phone numbers Z602B will text out when the alarms occur. The phone number needs to

include the country code (ex. Taiwan: +886). Maximum length: 16 digits.

y 3 → the text messages Z602B will send out when the alarms occur. Maximum length: 50

characters.

y 4. Get → acquire the previous setting and the GSM signal strength.

y 4. Set → save the current setting.

y 5 → change the password of text message for arming/disarming.

y 6 → GSM signal strength (0~31). 10 or above Rssi is recommended for using GSM features.

y 7 → call/SMS test.

While the alarm is triggered, Z602B will send the text messages to all the phone numbers in “Send SMS while

Alarm”. After sending SMS, Z602B will dial out the phone numbers in “Tel while Alarm” sequentially.

Z602B calls the 1st phone number first; calls the 2nd phone number when the 1st one doesn’t answer; and

then calls the 3rd phone number when the 2nd one doesn’t answer.