User's Manual

10
IAS ZONE(0x0500)
None
Commissioning(0x0015)
Optional
This lists the attributes of the basic information.
Attributes of the Basic Information
7. ZiG-BUTLER
ZiG-BUTLER is an exclusive program which allows users to easily control the devices, such as enable permit-join
feature, wirelessly through computer or laptop. Of course, any other 3
rd
party ZigBee enabled software is also
applicable. The system needs a Z103 USB dongle or a Z202 ZigBee gateway to communicate with the ZigBee
network.
7.1. Join Z602B into the network
When ZiG-BUTLER sees a coordinator or a router device, it will show the icon.
Identifier Name Type Range Access Default Mandatory /
Optional
0x0000 ZCLVersion Unsigned
8-bit integer
0x00 – 0xff Read only 0x03 M
0x0001 ApplicationVersi
on
Unsigned
8-bit integer
0x00 – 0xff Read only 0x14 O
0x0002 StackVersion Unsigned
8-bit integer
0x00 – 0xff Read only 0x2F O
0x0003 HWVersion Unsigned
8-bit integer
0x00 – 0xff Read only 0x03 O
0x0004 ManufacturerNa
me
Character
string
0 – 17 bytes Read only netvox O
0x0005 ModelIdentifier Character
string
0 – 17bytes Read only Z602B
E3R
O
0x0006 DateCode Character
string
0 – 17 bytes Read only 2013.11
.27
O
0x0007 PowerSource 8-bit
Enumeration
0x00 – 0xff Read only 0x84 M
0x0010 LocationDescript
ion
Character
string
0 – 17 bytes Read/write O
0x0011 PhysicalEnvironm
ent
8-bit
Enumeration
0x00 –0xff Read/write 0x00 O
0x0012 DeviceEnabled Boolean 0x00 –0 0x01 Read/write 0x01 M