User's Manual

Introduction
In an existing network, Z311C is an end device and does not permit join other devices like
router device does.
Z311C is an intrusion detect sensor for monitoring door/window and glass window in a
security system. The magnetic contacts are to be installed on between the gaps where the
door or window closes so that when the door opens the contacts moved away from each
other the device triggers the alarm system. With any vibration wave attempts to break the
window glass, the sensor triggers the alarm system in the device and notifies to its
corresponding enrolled CIE –Control and Indicating Equipment, security system in the
network. The CIE reads the information received, updates status changed and indicates
siren to sound. For the door/window application when the door is kept open, CIE would
receive door open notification and update the status until the door is closed and the CIE
will receive an update notification and replace the currently open-status with currently
close-status.
What is ZigBee?
ZigBee is a short range wireless transmission technology which defined for a minimum
complexity, low power consumption, low data rate, cost effective wireless solution. ZigBee
lies in between wireless markup technology and Bluetooth. ZigBee is based on
IEEE802.15.4 standard, the mutual co-ordination between thousands of sensors to
exchange data. Sensor to sensor or node-to-node communication is achieved through
relays of control data between devices with only a fraction of energy use which denoted
for highly transmission efficiency.
Note: Wireless communication, in some real use cases, can be limited by the signal
blockage. Please consult your service provider or place of purchase.
Product Specification
9 Fully IEEE 802.15.4 compliant
9 Utilizes 2.4GHz ISM band, up to 16 channels
9 Up to 70 meters non-obstacle wireless distance
9 Two CR2450 button batteries powered
9 Simple operation and device configuration