User's Manual

9
Versions
The Z100B module supports ultra-low-power applications, in combination with
long transmission range.
The Z100BC version features an on-module chip antenna. It is ideally suited for
all multi purpose wireless mesh solutions.
The Z100BI version where the RF signal connects to an external antenna
ideally suited to optimize antenna directivity and/or extended ranges.
Key Features
9 High performance and low power 32-bit ARM Cortex-M3 microprocessor
9 2.4 GHz IEEE 802.15.4 compliant RF transceiver
9 Integrated IEEE 802.15.4 PHY and lower MAC with DMA
9 Only 1.5μA current consumption in power-down mode, where external
interrupts or the RTC can wake up the system
9 1 μA current consumption in stand-by mode, where external interrupts
can wake up the system.
9 Up to 7dBm power output
9 CSMA/CA hardware support.
9 Wide supply voltage range (2.1V – 3.6V DC)
9 Digital RSSI / LQI support and Powerful DMA functionality
9 12-bit ADC with up to six inputs
9 AES security coprocessor
9 Two Serial Controllers with DMA
9 Two 16-bit general-purpose timers and one 16-bit sleep timer
9 Watchdog timer and power-on-reset circuitry
9 Powerful and flexible development tools available