User's Manual

- 3 -
Z1 0 0 A
Z
i
g
beePro
TM
- RF M odule
Ver sions
The Z100A module supports ultra-low-power applications, in
combination with long transmission range.
The Z100AC version features an on-module chip antenna. It is
ideally suited for all multi purpose wireless mesh solutions.
The Z100AI version where the RF signal connects to an external
antenna, ideally suited for all multi purpose wireless mesh solutions
that require specific, optimized antenna performance, such as
increased directivity and/or extended ranges.
Ke y Feat ures
 High performance and low power 8051 microcontroller core.
 2.4 GHz IEEE 802.15.4 compliant RF transceiver
 Excellent receiver sensitivity and robustness to interferers
 Only 0.8μA current consumption in power-down mode, where
external interrupts or the RTC can wake up the system
 0.5 μA current consumption in stand-by mode, where external
interrupts can wake up the system.
 CSMA/CA hardware support.
 Wide supply voltage range (2.0V – 3.6V DC)
 Digital RSSI / LQI support and Powerful DMA functionality
 Battery monitor and temperature sensor.
 7-12 bits ADC with up to eight inputs
 AES security coprocessor
 Two programmable USARTs with support for several serial
protocols.
 One IEEE 802.15.4 MAC Timer, one general 16-bit timer and
two 8-bit timers
 Powerful and flexible development tools available