User's Manual

- 2 -
Z1 0 0 A
Z
i
g
beePro
TM
- RF M odule
Copyright© N et vox Te chnology Co., Lt d.
This document contains proprietary technical information which is
the property of NETVOX Technology and is issued in strict
confidential and shall not be disclosed to others parties in whole or in
parts without written permission of NETVOX Technology.
The specifications are subjected to change without prior notice.
Product Descr ipt ion
The Z100A is designed to be SMD-mounted onto a host PCB.
SMD-mounting provides the best RF performance at the lowest cost.
Additionally the Z100A is designed to occupy minimal board space on
the host PCB, which already includes plentiful interfacing ports and
power management circuits. So it can be easily integrated into other
device without the need for RF experience and expertise.
The Z100A operates in the 2.4-2.4835 GHz unlicensed worldwide
ISM band .
The Zigbee RF module Z100A
offered from NETVOX is low power,
2.4GHz ISM band transceiver, based
on the TI CC2530 single chip ZigBee
Pro / IEEE 802.15.4 solution.
The Z100A comes in two different
versions. The on-board chip antenna,
and the on-board metal antenna.
Z100A(Chip Ant)
Figure 1
Z100A(Metal Ant)