User's Manual

14
(4) On the Device tab, select the device to which you would like to bind. Next, click Select ClusterID, choose
the Cluster, and click OK.
Choose bind device sharing the same cluster ID: 0001 of binding request through “device’.
to choose cluster ID which is needed.
(5) Right click on the End Point of and select Properties.
(6) On the Report Config tab, check Auto to modify the settings. Click Set to complete the setting.
If there is no customized setting, the default 0X0020 shows as below:
(a) 0X0020 default Min. 3600 seconds. Max. 3600 seconds. Reportable change = 0.
(b) 0X0035 default battery alarm mask = 1.
(c) 0X0036 default battery voltage min threshold=2.4V
BLZ-US-01