User Manual

- 7 -
Configuration Working Channel
If there are several scanners working in the same environment, you
have to configure the working channel for each scanner, otherwise the
data will get crossed when they are working in the same time.
Configure Channel
1. Scan one of below channel
2. Scan will make beep beep beep beep ... sound
3.Plug the USB receiver, the beep sound will stop immediately.
(Configure sucessfully)
If the beep sound was not stopped after you plug the USB receiver
please repeat step 1,2 and plug the USB receiver on another USB port.
* One-to-one pairing
One-to-many pairing