User Manual

- 6 -
5). By scanning the following barcode, the device leaves the store
mode, data will be outputed immediately the moment when you scan a
barcode. (By default)
Quick Store Mode
Configure Idle time
Important Note-only apply for scanner working via 2.4Ghz channel
Scanner will stay awake during the idle time that you set for it and
turn to sleep if you haven't used it during the whole idle time.
Idle Time- 1 Min Idle Time- 3 Mins
Idle Time- 10 Mins Idle Time- 30 Mins
Sleep Mode can be disabled by scanning below command barcodes
PowerOff Disable Sleep Mode