User Manual

- 5 -
Working Mode
If you are heading for a working area which lies outside the signal
range, you may activate store mode of the scanner. Under store mode,
all scanned data will be stored directly into the buffer memory of the
device. Furthermore, the data entries will be permanently saved in the
buffer memory prior to the manual upload into the working station, so
that you may upload them time and again to your liking.
1). By scanning the following barcode, the store mode will be activated
Store Mode
2). By scanning the following barcode, all data in the buffer memory
will be deleted
Clear All Memory
3).By scanning the following barcode, all data entries in the buffer
memory can be uploaded after reconnecting to the working station .
Uploading the Data
4). By scanning the following barcode, the gross quantity of the
uploaded data entries will be summarised .
Summarising of Uploaded Data Entry Quantity