User Manual

- 30 -
FAQ
1. Some barcodes can not be read, why ?
a. Dirty or unclear barcodes might not be read.
b. Digital barcode displayed on phone, computers or tablets can’t be read
by laser scanner.
c. The possible reason is that the configuration for some barcode types are
not commonly used is off by default. You need to activate a specific barcode
type to get it to work. Please contact the supplier that you’ve purchased it
from.
2. The data can not be sent to my computer. Why?
a. Please make sure you have turned off the store mode. It will storeyour
scans internally instead of instantly transmitting them to the
connecteddevice. You need to scan the “Quick Store Mode” barcode to send
thescanned codes to your connected device.
b. The scanner has disconnected with the USB receiver (It will make 3
beeps when you scan the normal barcode and data can not be uploaded).
Follow Configure Channelto configure the channel for the USB receiver.
4. How to solve the messy code problem encountered while using other
foreignlanguages?
The default language is English. Please refer to“Keyboard language” to
change the language according to your own needs.
5. Important Notes:
When scanner make 5 beeps, please charge power for the scanner
immediately,otherwise the scanner can not work under low voltage .
Only apply for wireless scanner.